PlayTruckSims: Грузовые симуляторы, Дальнобойщики, Euro Truck Simulator 2, American Truck Simulator

Информация о пользователе

Привет, Гость! Войдите или зарегистрируйтесь.



Zmodeler II. Обсуждение и вопросы

Сообщений 601 страница 630 из 904

601

Demetriys

Видимо плохо изучил - дэфолт и Занозу...
http://s004.radikal.ru/i205/1105/42/04128c45c999t.jpg

Это просто пример того где прописываются варианты текстур... , ну и соответственно в свойствах модели....
Но я не помню с какой версии Занозы это реально.... совсем старые это не поддерживали... :blush:

И к стати проще для АЛХ конвертнуть Даф из ГТС... там ПМГ одной версии...

Да к стати забыл сказать что от версии Занозы зависит прописка полного пути к текстуре или только название...
Опять же не помню с какой версии это началось...
В последних версия полный путь только если текстура лежит в другой папке , а не там где ПМГ...
У меня просто всегда последняя... :canthearyou:

Отредактировано Conte (2011-05-04 21:57:53)

0

602

Спасибо, буду пробывать))

0

603

Парни помогите занозу настроить, открываю почти любую модель и получается такая каша http://s012.radikal.ru/i321/1105/77/b01e67f82042t.jpg (настройки видите) когда ставлю галочку на software то модель открывается нормальная, но заноза тормозит жутко... на днях видюху эту купил и винду поменял, раньше нормально всё было

0

604

У тебя все модели так открываются?

0

605

Mauser почти все, когда галочку ставлю на software то открываются нормально но заноза тормозит нереально, впервые такое...думал сначало pmg левый...ан нет, остальные тоже так

0

606

Народ, кто знает, как можно в АЛХ добавить high beam flare(дальний свет на отдельной фаре), пробовал утащить из TZ express truck, пишит вот это: 21:26:27 : [unit] File '/unit/hookup/vehicle_high_beam.sii', line 3:
21:26:27 : [unit] The unit name 'flare.vehicle.headl' is already taken by an existing unit (of type 'flare_vehicle').

0

607

Demetriys
С чего ты решил что это будет работать?

0

608

Mauser, для хауля был мод, в котором фары по очереди включались, правда я забыл где он(я перепутал с TZ)

0

609

Помогите, После зкспорта в игре машина устраивает пляски. Даже ничего не изменяя просто импорт и сразу экспорт бозовых моделей машин ,та же пляска,правда однажды получилось и всё. ZModeler_224_bu,ZModeler-2.2.5

0

610

Malaec, ты можеш конкретно описать?

0

611

Пацаны такой вопрос,не получается правильно эскпортить прицеп в Хауль,подсказали что надо с прецем работать в 224 Занозе,вообщем дела такие,решил я сделать груз на прицепе комбайн,взял дефолт автовоз,подредактировал сам прицеп и вместо машин поставил комбайн,сделал текстуры,назвал как оригинальные((на первое время)протестить),все это поставил на оригинальные маты car_carrier (dif_spec.add.env) и car (dif_spec),указываю путь в свойтвах такой vehicle/trailer/car,после чего экспорт и в игру,в игре прицеп вылетает,либо без груза,пустая телега со съебуренными текстурами,лог молчит как рыба,после импорта прицепа в занозу он появляется с текстурами оригинала автовоза,или же вообще непонятный,и путь в свойствах модели vehicle/truck/trailer,подскажите пожалуйста,до этого делал прицепы в 211 занозе,но там свои тонкости,которые не подходят к этому прицепу!

0

612

Если конкретней, то автомобиль подпрыгивает,качается в разные стороны.Когда  стоит нормально но при попытке езды начинаются чудеса, выглядит это прикольно так как все авто этой модели такое творят. Может я экспорт неправильно делаю,не всё там включаю. точнее я вообще там лишнего не трогал.
В сети много моделей но практически все большого размера, и я ни как не пойму какой смысл такой подробной дитализации салона когда ,лично я его не вижу,там и огнетушитили и всякая хрень это лишний вес, я подобрал авто до ~1Мб, и тогда хоть машины не так дублируются. И город похож на город.
И немного не в тему, пытался в место дорог метро сотворить простую трассу и опять проблема,вроди  поудалял рельсы и в игре их нет,а на движение сказывается,как будто есть.

0

613

привет всем!
http://s016.radikal.ru/i334/1105/d5/721320790359t.jpg
подскажите пожалуйста как мне сделать два отверстия на детале(см. фото).у меня Zmodeler  2.2.3 (русская)но можно и объяснение и на анг. версии.заранее благодарен

0

614

jameson85
Вот хелпик,сам по нему учился!

Свернутый текст

0

615

classick
При такой сетке как у jameson85 это будет более чем геморойно :D

0

616

stalker45,наооброт легче,имхо) Отверстие в спойлере моём ты же видел и сетку)

0

617

Mr.Nick_[on]
Да видел, только сетка там другая..поясню
На этом спойлере сетка расположена идентично той что на видео
http://i22.fastpic.ru/thumb/2011/0531/c8/a945e8d22938516bc64473c1fc10f6c8.jpeg
Достаточно вершин для последующего склеивания
На той сетке что у jameson85 вершин будет не достаточно, т.к. та часть в которую он хочет врезать отверстие не имеет достаточного кол-ва близких вершин для склеивания. Поэтому мало того что придется ковыряться с отверстиями, своих вершин придется добавлять дополнительно для каждой дырки поэтому процесс будет намного геморойнее чем на видео. Проще не возиться со склеиванием а просто снести часть ступеней, и сделать заново уже с отверстиями

0

618

stalker45,зачем нам вершины? Если есть хотя бы 1 ребро,этого уже достаточно и даже лучше,ем возится с кучей.Могу даже видео снять.

0

619

classick stalker45 ну спасибо хоть за это)))

Отредактировано jameson85 (2011-05-31 16:37:31)

0

620

jameson85 написал(а):

ну спасибо хоть за это)))

Ты им одожение что ли делаешь?  :D Вообще то они всё правильно написали,никак по другому в занозе это и не делается.

0

621

Mr.Nick_[on] я никому ничего не делаю,я просто поблагодарил за то что они напряглись и помогли мне

0

622

Ничего сложного в вырезах нет,просто надо покумекать над правильным расположением вершин!Я диски вырезал с рисунком,помудохался но сделал ведь,надо просто грамотно подойти к вопросу!

0

623

;)  Бросайте вы эту занозу! Осваивайте макс, в разы удобнее, а заноза используется как конвертор всего лишь. Хотя есть такие кто думает, что в занозе моделировать лучше всего.

0

624

на мой взгляд интересный - Метод врезания в zm2 (by Falkrum):

Это интересно

0

625

Поработал с машиной в занозе сделал экспорт правил маты и пмд ,пережмал текстуры захожу игра виснет и выкидывает ,в логе нету чего на всякий случай вот лог

Свернутый текст

******** : log created on : Wednesday June 01 2011 @ 14:02:25
14:02:25 : [sys] running on x86 / Unknown (version 6.1) /
14:02:25 : [sys] DirectX version : 4.09.00.0904
14:02:25 : [cpu] GenuineIntel [Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz] at ~1862MHz.
14:02:25 : [cpu] Features utilized: fpu cmov mmx sse sse2.
14:02:25 : [sys] using QPC / unknown timer (thread affinity: 1), frequency 1818369Hz
14:02:25 : physical memory detected (2096504K/719264K)
14:02:25 : virtual memory detected (2097024K/2048172K)
14:02:25 : Trying to allocate memory pool (409600K)
14:02:25 : [zipfs] base.scs: mounted ok, 8588 entries [crc_0x165be8b6]
14:02:25 : [ufs] registered symlink from /custom_build/ru_ru to /
14:02:25 : [zipfs] <mem-addr-file>: mounted ok, 11 entries [crc_0x343c90c9]
14:02:25 : [ufs] Home directory: 'C:/Users/вадим/Documents/Euro Truck Simulator'.
14:02:25 : Mounting extra package: C:/Users/вадим/Documents/Euro Truck Simulator/mod/Desktop.scs
14:02:25 : [zipfs] Cannot find the zip_central_dir_end signature in 'C:/Users/вадим/Documents/Euro Truck Simulator/mod/Desktop.scs'.
14:02:25 : Mount failed: C:/Users/вадим/Documents/Euro Truck Simulator/mod/Desktop.scs
14:02:25 : Mounting extra package: C:/Users/вадим/Documents/Euro Truck Simulator/mod/Iveco EuroTech.scs
14:02:25 : [zipfs] C:/Users/вадим/Documents/Euro Truck Simulator/mod/Iveco EuroTech.scs: mounted ok, 150 entries [crc_0x1a010931]
14:02:25 : Mounting extra package: C:/Users/вадим/Documents/Euro Truck Simulator/mod/Map 1.6 for STA.scs
14:02:25 : [zipfs] C:/Users/вадим/Documents/Euro Truck Simulator/mod/Map 1.6 for STA.scs: mounted ok, 4135 entries [crc_0xb3af0327]
14:02:25 : Mounting extra package: C:/Users/вадим/Documents/Euro Truck Simulator/mod/дым.scs
14:02:25 : [zipfs] C:/Users/вадим/Documents/Euro Truck Simulator/mod/дым.scs: mounted ok, 230 entries [crc_0xa4c7e578]
14:02:25 : exec /home/config.cfg
14:02:25 : [sys] Executing /home/config.cfg ...
14:02:25 : uset g_minicon "0"
14:02:25 : uset g_console "1"
14:02:25 : uset g_trackir "1"
14:02:25 : uset g_developer "0"
14:02:25 : uset g_save_idx "1"
14:02:25 : uset g_mouse_control "0"
14:02:25 : uset g_steering_func_param "0.0"
14:02:25 : uset g_joy_axis_brake_dz "0.0"
14:02:25 : uset g_joy_axis_brake "7"
14:02:25 : uset g_joy_ff_gain "1.0"
14:02:25 : uset g_joy_axis_throttle_dz "0.0"
14:02:25 : uset g_joy_axis_throttle "7"
14:02:25 : uset g_joy_axis_ff "0"
14:02:25 : uset g_joy_axis_combine "0"
14:02:25 : uset g_joy_axis_steer_sens "0.6"
14:02:25 : uset g_joy_axis_steer_dz "0.0"
14:02:25 : uset g_joy_axis_steer "7"
14:02:25 : uset g_tutorial "0"
14:02:25 : uset g_job_sort "0"
14:02:25 : uset g_gauges "1"
14:02:25 : uset g_mirrors "1"
14:02:25 : uset g_fatigue "1"
14:02:25 : uset g_police "1"
14:02:25 : uset g_subtitles "0"
14:02:25 : uset g_quality "2"
14:02:25 : uset g_reflection "1"
14:02:25 : uset g_atrans "0"
14:02:25 : uset g_flyspeed "100.0"
14:02:25 : uset g_lang "ru_ru"
14:02:25 : uset g_colbox "0"
14:02:25 : uset r_gamma "1.0"
14:02:25 : uset r_path "5"
14:02:25 : uset r_msaa "4"
14:02:25 : uset r_fullscreen "1"
14:02:25 : uset r_mode "1024x768x32x0"
14:02:25 : uset r_device "gl"
14:02:25 : uset r_driver "gl"
14:02:25 : uset g_texture_usage_stats "0"
14:02:25 : uset g_fps "0"
14:02:25 : uset ds8_mix_channels "2"
14:02:25 : uset ds8_mix_depth "16"
14:02:25 : uset ds8_mix_rate "44100"
14:02:25 : uset ds8_reverse_stereo "0"
14:02:25 : uset s_acceleration "0"
14:02:25 : uset s_mix_channels "2"
14:02:25 : uset s_mix_depth "16"
14:02:25 : uset s_mix_rate "44100"
14:02:25 : uset s_sfx_enabled "1"
14:02:25 : uset s_music_enabled "0"
14:02:25 : uset s_sfx_volume "0"
14:02:25 : uset s_music_volume "0"
14:02:25 : uset s_reverse_stereo "0"
14:02:25 : uset s_device "ds8"
14:02:25 : uset r_vsync "1"
14:02:25 : uset r_quirks "0"
14:02:25 : uset r_anisotropy_factor "0.5"
14:02:25 : uset r_texture_detail "0"
14:02:25 : uset i_force_gain "1.0"
14:02:25 : uset i_feedback "1"
14:02:25 : uset i_joystick2 "-1"
14:02:25 : uset i_joystick1 "-1"
14:02:25 : uset i_deadzone "0.0"
14:02:25 : uset i_device "di8"
14:02:25 : uset m_invert "0"
14:02:25 : uset m_sensitivity "0.33"
14:02:25 : uset m_filter "0"
14:02:25 : Euro Truck Simulator init ver.1.00 (rev. 23463)
14:02:26 : [gl] ICD OpenGL driver detected.
14:02:26 : [gl] driver: Radeon X1600/X1650 Series
14:02:26 : [gl] vendor: ATI Technologies Inc.
14:02:26 : [gl] version: 2.1.8545 Release
14:02:26 : [gl] GL extensions: GL_AMD_performance_monitor GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_map_buffer_range GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_shader_objects GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shadow GL_ARB_shadow_ambient GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_array_object GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_envmap_bumpmap GL_ATI_fragment_shader GL_ATI_meminfo GL_ATI_separate_stencil GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_gpu_program_parameters GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texgen_reflection GL_EXT_texture3D GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_swizzle GL_EXT_vertex_array GL_KTX_buffer_region GL_NV_blend_square GL_NV_texgen_reflection GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_WIN_swap_hint WGL_EXT_swap_control
14:02:26 : [gl] GL_max_texture_size: 4096
14:02:26 : [gl] taking advantage of 'GL_ARB_multitexture'
14:02:26 : [gl] Sampler count: 8
14:02:26 : [gl] taking advantage of 'GL_ARB_fragment_program'
14:02:26 : [gl] taking advantage of 'GL_ARB_texture_mirrored_repeat'
14:02:26 : [gl] taking advantage of 'GL_ARB_texture_border_clamp'
14:02:26 : [gl] taking advantage of 'GL_ARB_texture_compression'
14:02:26 : [gl] taking advantage of 'GL_EXT_texture_compression_s3tc'
14:02:26 : [gl] taking advantage of 'GL_ARB_texture_cube_map'
14:02:26 : [gl] taking advantage of 'GL_ARB_texture_env_crossbar'
14:02:26 : [gl] taking advantage of 'GL_ARB_texture_env_combine'
14:02:26 : [gl] taking advantage of 'GL_ARB_texture_rectangle'
14:02:26 : [gl] taking advantage of 'GL_ARB_transpose_matrix'
14:02:26 : [gl] taking advantage of 'GL_ARB_vertex_buffer_object'
14:02:26 : [gl] taking advantage of 'GL_ARB_vertex_program'
14:02:26 : [gl] Vertex attribute count: 16
14:02:26 : [gl] taking advantage of 'GL_ARB_shader_objects'
14:02:26 : [gl] taking advantage of 'GL_ARB_vertex_shader'
14:02:26 : [gl] taking advantage of 'GL_ARB_fragment_shader'
14:02:26 : [gl] taking advantage of 'GL_ATI_fragment_shader'
14:02:26 : [gl] taking advantage of 'GL_ATI_draw_buffers'
14:02:26 : [gl] taking advantage of 'GL_ATI_texture_env_combine3'
14:02:26 : [gl] taking advantage of 'GL_EXT_blend_color'
14:02:26 : [gl] taking advantage of 'GL_EXT_compiled_vertex_array'
14:02:26 : [gl] taking advantage of 'GL_EXT_draw_range_elements'
14:02:26 : [gl] taking advantage of 'GL_EXT_rescale_normal'
14:02:26 : [gl] taking advantage of 'GL_EXT_secondary_color'
14:02:26 : [gl] taking advantage of 'GL_EXT_separate_specular_color'
14:02:26 : [gl] taking advantage of 'GL_EXT_texture3D'
14:02:26 : [gl] taking advantage of 'GL_EXT_texture_edge_clamp'
14:02:26 : [gl] taking advantage of 'GL_EXT_texture_env_add'
14:02:26 : [gl] taking advantage of 'GL_EXT_texture_filter_anisotropic'
14:02:26 : [gl] Max anisotropy factor: 16
14:02:26 : [gl] taking advantage of 'GL_SGIS_generate_mipmap'
14:02:26 : [gl] taking advantage of 'WGL_ARB_extensions_string'
14:02:26 : [gl] WGL extensions: WGL_ARB_extensions_string WGL_ARB_pixel_format WGL_ATI_pixel_format_float WGL_ARB_pixel_format_float WGL_ARB_multisample WGL_EXT_swap_control WGL_ARB_pbuffer WGL_ARB_render_texture WGL_ARB_make_current_read WGL_EXT_extensions_string WGL_ARB_buffer_region WGL_EXT_framebuffer_sRGB WGL_ATI_render_texture_rectangle WGL_EXT_pixel_format_packed_float WGL_I3D_genlock WGL_NV_swap_group WGL_ARB_create_context WGL_AMDX_gpu_association
14:02:26 : [gl] taking advantage of 'WGL_EXT_swap_control'
14:02:26 : [gl] taking advantage of 'WGL_ARB_pixel_format'
14:02:26 : [gl] taking advantage of 'WGL_ARB_pbuffer'
14:02:26 : [gl] taking advantage of 'WGL_ARB_render_texture'
14:02:26 : [gl] taking advantage of 'GL_ARB_multisample'
14:02:26 : [gl] Detected support for 6x anti-aliasing.
14:02:26 : [gl] Detected support for 4x anti-aliasing.
14:02:26 : [gl] Detected support for 2x anti-aliasing.
14:02:26 : [gl] Detected support for 1x anti-aliasing.
14:02:26 : Rendering path available: GL1X
14:02:26 : Rendering path available: ARB1
14:02:26 : Rendering path available: R2XX
14:02:26 : Rendering path available: ARB2
14:02:26 : Rendering path available: GL2X
14:02:26 : [dx9] Direct3D9 detected.
14:02:26 : [dx9] Number of adapters found: 1
14:02:26 : [dx9] Adapter #0: Radeon X1600/X1650 Series  (atiumdag.dll) [driver version: 8.14.10.647]
14:02:26 : Rendering path available: SM2X
14:02:26 : Rendering path available: SM3X
14:02:26 : [gl] CDS init: OK
14:02:26 : [gl] SetPixelFormat: OK (14, color 32 bits, depth 24 bits).
14:02:26 : [gl] wglCreateContext: OK
14:02:26 : [gl] OpenGL framebuffer context init OK
14:02:26 : [gfx] Created drawable (/procedural/dashboard.tobj)
14:02:26 : [gfx] Created drawable (/procedural/vehicle_env.tobj)
14:02:26 : [gfx] Created drawable (/procedural/generic_env.tobj)
14:02:26 : [gfx] Created drawable (/procedural/water_env.tobj)
14:02:27 : [snd] select device (ds8)
14:02:27 : [ds8] Available device : Первичный звуковой драйвер ().
14:02:27 : [ds8] Available device : Динамики (Realtek AC'97 Audio) ({0.0.0.00000000}.{66b7e779-d318-481c-abd2-ffe300efe320}).
14:02:27 : [ds8] Initialization OK.
14:02:27 : g_ui_recache
14:02:27 : exit
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_bluel_p.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_bluel_p.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_bluelp.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_bluel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brakelpb.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_brakelpb.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_brakelpb.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_brakelpb.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brakelps.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_brakelps.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_brakelps.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_brakelps.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brake_cab.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_brake_cab.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_brake_cab.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_brake_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_headl_p.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_headl_p.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_headlp.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_headl_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_reversel_p.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_reversel_p.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_headlpx.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_reversel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_revers_cab.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_revers_cab.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_headlsmout.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_revers_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_headl_cab.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_headl_cab.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_headl_cab.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_headl_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_ind_cab.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_ind_cab.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_ind_cab.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_ind_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_orangel_p.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_orangel_p.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_lblinkerlps.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_orangel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_blinker_cab.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_blinker_cab.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_lblinker_cab.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_blinker_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_orangel_p.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_orangel_p.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_orangelp.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_orangel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_pr_cab.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_pr_cab.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_pr_cab.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_pr_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_orangel_p.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_orangel_p.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_rblinkerlps.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_orangel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_blinker_cab.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_blinker_cab.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_rblinker_cab.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_blinker_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brakelpb.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_brakelpb.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_rearlp.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_brakelpb.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brakelps.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_brakelps.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_rearlps.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_brakelps.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brake_cab.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_brake_cab.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_rearlsmout.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_brake_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_reversel_p.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_reversel_p.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_reverselp.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_reversel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_reversel_ps.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_reversel_ps.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_reverselps.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_reversel_ps.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_revers_cab.pmd)
14:02:27 : [ld] failed to open /model/flare/vehicle_revers_cab.pmd
14:02:27 : [unit] File '/unit/hookup/vehicle_revers_cab.sii', line 10:
14:02:27 : [unit] The requested value '/model/flare/vehicle_revers_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.
14:02:27 : [Ode] Starting physics server: Open Dynamics Engine (svn revision 1119)
14:02:28 : Not enough (0) rear wheels in model Iveco EuroTech.
14:02:28 : Loading city data ....
14:02:36 : [fs] Unable to open file for reading. (/material/ui/logo/rondomedia.mat)
14:02:36 : [material] Can not open '/material/ui/logo/rondomedia.mat'
14:02:36 : [fs] Unable to open file for reading. (/material/ui/logo/rondomedia_focus.mat)
14:02:36 : [material] Can not open '/material/ui/logo/rondomedia_focus.mat'
14:02:42 : game
14:02:42 : [Ode] Starting physics server: Open Dynamics Engine (svn revision 1119)
14:02:42 : Not enough (0) rear wheels in model Iveco EuroTech.
14:02:42 : Loading resource server data ....
14:02:42 : Loading road data ....
14:02:42 : Loading terrain data ....
14:02:42 : Loading railing data ....
14:02:42 : Loading building data ....
14:02:42 : Loading model data ....
14:02:42 : [fs] Unable to open file for reading. (/model/esc/busstop.pmd)
14:02:42 : [ld] failed to open /model/esc/busstop.pmd
14:02:42 : Loading prefab data ....
14:02:42 : Loading sign data ....
14:02:42 : Loading traffic lights data ....
14:02:42 : Loading city data ....
14:02:42 : Loading vegetation data ....
14:02:42 : Loading hinges data ....
14:02:42 : Loading stamp data ....
14:02:42 : Loading movers data ....
14:03:00 : Map successfully loaded ....
14:03:01 : Starting the campaign ...

0

626

привет .кто подскажет как Zm закруглить углы?

0

627

jameson85
Какие углы?

0

628

stalker45 написал(а):

Какие углы?

Он наверное имеет ввиду фаски снять, чтоб углы , скажем куба, стали округлыми. Это возможно в том же Инвенторе, а тут , наверное, только ручками.

0

629

может про это? http://forum.zmodeler2.com/viewtopic.php?t=3131

+1

630

вадим32 написал(а):
Свернутый текст

14:02:27 :[fs] Unable to open file for reading. (/model/flare/vehicle_bluel_p.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_bluel_p.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_bluelp.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_bluel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brakelpb.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_brakelpb.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_brakelpb.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_brakelpb.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brakelps.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_brakelps.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_brakelps.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_brakelps.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brake_cab.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_brake_cab.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_brake_cab.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_brake_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_headl_p.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_headl_p.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_headlp.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_headl_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_reversel_p.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_reversel_p.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_headlpx.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_reversel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_revers_cab.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_revers_cab.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_headlsmout.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_revers_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_headl_cab.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_headl_cab.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_headl_cab.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_headl_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_ind_cab.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_ind_cab.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_ind_cab.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_ind_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_orangel_p.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_orangel_p.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_lblinkerlps.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_orangel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_blinker_cab.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_blinker_cab.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_lblinker_cab.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_blinker_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_orangel_p.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_orangel_p.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_orangelp.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_orangel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_pr_cab.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_pr_cab.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_pr_cab.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_pr_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_orangel_p.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_orangel_p.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_rblinkerlps.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_orangel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_blinker_cab.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_blinker_cab.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_rblinker_cab.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_blinker_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brakelpb.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_brakelpb.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_rearlp.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_brakelpb.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brakelps.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_brakelps.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_rearlps.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_brakelps.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_brake_cab.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_brake_cab.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_rearlsmout.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_brake_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_reversel_p.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_reversel_p.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_reverselp.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_reversel_p.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_reversel_ps.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_reversel_ps.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_reverselps.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_reversel_ps.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [fs] Unable to open file for reading. (/model/flare/vehicle_revers_cab.pmd)14:02:27 : [ld] failed to open /model/flare/vehicle_revers_cab.pmd14:02:27 : [unit] File '/unit/hookup/vehicle_revers_cab.sii', line 10:14:02:27 : [unit] The requested value '/model/flare/vehicle_revers_cab.pmd' of the attribute 'model_desc' of unit '.flare' (of type 'model_template') is out of the attribute domain.14:02:27 : [Ode] Starting physics server: Open Dynamics Engine (svn revision 1119)14:02:28 : Not enough (0) rear wheels in model Iveco EuroTech.14:02:28 : Loading city data ....14:02:36 : [fs] Unable to open file for reading. (/material/ui/logo/rondomedia.mat)14:02:36 : [material] Can not open '/material/ui/logo/rondomedia.mat'14:02:36 : [fs] Unable to open file for reading. (/material/ui/logo/rondomedia_focus.mat)14:02:36 : [material] Can not open '/material/ui/logo/rondomedia_focus.mat'

Это в логе "ничего нет"?  :huh:
Ищи и проверяй все файлы, что содержатся в этих строчках лога.

0